Thundermax Decel Fuel Cut Feature Use Bedienungsanleitung PDF herunterladen

Decel Fuel Cut

The Decel Fuel Cut option is a feature of the SmartLink Software that

comes standard with the ThunderMax EFI System. If you have installed the

ThunderMax with AutoTune on your motorcycle, ridden your bike, and

discovered that your bike backfires at specific RPMs on deceleration – this

feature can be turned on to quickly and easily correct the problem. The Decel

Fuel Cut feature does not turn on by default, but must be applied manually in

the SmartLink software. Use the information provided below to adjust this feature

for your specific needs.

Decel Fuel Cut Features

The Decel Fuel Cut option I located in the TUNING MAPS TREE under

BASIC SETTINGS, then MODULE CONFIGURATION.

Decel Fuel Cut:

The “Decel Fuel Cut” option is the ON / OFF switch for the Decel Fuel Features.

Using a value of (0) turns the feature off, and a value of (1) turns on this option.

For example, if your motorcycle does not currently pop on deceleration, it is not

recommended to activate this feature. If you are experiencing deceleration

popping, set this value to (1) and proceed forward to setting the Decel Fuel

options.

1 2 3 4

Seite 1

Decel Fuel Cut The Decel Fuel Cut option is a feature of the SmartLink Software that comes standard with the ThunderMax EFI Sy

Seite 2

Seite 3

Decel Fuel Cut Rpm Low: The “Decel Fuel Cut RPM Low” setting should reflect the lowest RPM where the deceleration popping is occurring. This

Decel Post Fuel Enrichment: The Decel Post Fuel Enrichment feature is similar to an accelerator pump on a carburetor. This enrichment feature smoot

Keine Kommentare

Thundermax Decel Fuel Cut Feature Use Bedienungsanleitung